Making XMas Gifts, Dye in Shellac?, Mortising Machine? and MORE!!!

This Episodes Questions:

Brians Questions:

Hey all, great podcast, thank you for doing what you do. What are some favorite Christmas gifts to make with scrap wood? Specific context for me: been woodworking for a while, hobbyist, been giving gifts to people for years and now I've lost track of who has gotten what. Just trying to get some ideas for this year. Time is easier to give to a project than money. I also like the lathe for scrap projects. Have found a good glue up can make a good looking bowl. Follow up/more specific questions: What are some favorite scrap wood projects that are not kits from Rockler (or similar companies)? Other than a bowl, what are some other gifts that can come off the lathe? What are some non kitchen items to make from scrap wood? (I believe I've given too many cutting boards, charcuterie boards, cooking utensils over the years). Jim

Hello friends, I haven't submitted a question in a hot minute, as the kids say, but I finally have a good one for you and it's regarding something I'm truly stumped about. After hitting you guys with question after question about, "How do I do _______ without a jointer or planer?" I finally got myself a thickness planer. It's louder than all hell, and it's nothing fancy, but I'm glad I have it. There's only one issue that I'm having with it, and I can't figure out what's causing it. When I'm getting ready to Mill down some stock, I first set the height of the planer blades so they aren't taking off any material at the start. The depth of cut indicator is at "0". I'll even send the board through with the blades at this height sometimes just to make sure the gauge is accurate. I then lower the blades by 1/64", aka a quarter turn of the handle. I send the piece of stock through, it takes off some material, whatever. So far, so good. Here's what's throwing me off: after I've fed that board through the planer, I can feed that same board right back through, with the blades still set at the same height, and the planer will take off about the same amount of material, from the sound of it. This doesn't only happen on a second pass, either. I can feed the same board through the planer six, seven, or eight times, without adjusting the cutting depth, and the planer continues to remove material at each pass. Unless I'm missing something about how planers work, I would think that the material should have been planed down to thickness on the first pass. I can't figure out why it continues to remove material after multiple passes when I haven't changed the settings. This happens to me every time I use my planer. Not sure if this is relevant but I have a Ridgid #R4331 planer. I also attached a link to a very loud video demonstrating this phenomenon. Thank you in advance for your help and expertise, and thank you for continuing to take the time to put out this phenomenal woodworking podcast. I hope your projects are doing well, and I hope you're doing even better. Sincerely, Zachary T Owens

Guys Questions:

Hello, Thank you for the great podcast and for answering my questions. I have a question on using Transtint dye. I heard Guy and Huy mention they use it. Not sure about Brian. Anyway, I screwed up 2 projects when trying to apply it. In both cases I mixed it into Zinser Sealcoat shellac. Firs time applied with foam brush on elm. The second time wiped on on maple plywood. In both cases, the color was very inconsistent. I ended up throwing away the plywood and sanding the elm back to bare wood. My question is, is it ok to add Transtint dye to shellac? If so, what could be my problem? More importantly, can you tell me the process you follow to apply Transtint dye? The dye I was using is Transtint Dark Walnut. Max

I have owned my Sawstop cabinet saw for nearly a year now and I have consistently been impressed with the quality of the machine. One thing that has bugged me since I got the saw is the occasional binding I get when I do a rip cut especially. I have meticulously aligned the fence with the blade/miter slots and with a dial indicat